The post Idler Zx30U Zx30U 2 Zx30Ur 2 Zx33 Zx35U Zx35U 2 Zx appeared first on HEAVY EQUIPMENT PARTS.

The post Idler Zx30U Zx30U 2 Zx30Ur 2 Zx33 Zx35U Zx35U 2 Zx appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Carrier Roller zx33/30 4718355
– Shell running diameter and flange width confirmed to OEM specification
– Bore and shaft dimensions to OEM drawing tolerances for drop-in fitment
– Mounting geometry matches OEM — no modification of machine frame required

Heavy-Duty Construction
This carrier roller zx33/30 4718355 is manufactured using alloy steel body, hardened running surfaces for extended service life against chain bush contact. Pre-greased and sealed bearing unit: provides OEM-equivalent load capacity and seal life. Machined bracket and mounting faces for accurate installation. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Replace if roller is flat-spotted, cracked, or shows measurable bearing play
– Inspect seals for oil leakage at every major service
– Coordinate replacement with track chain service for minimum machine downtime

Australia-Wide Supply
We supply high-quality carrier roller zx33/30 4718355 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Carrier Roller zx33/30 4718355 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Sprocket ZX33 2055869
– Tooth pitch matches OEM track chain pitch
– Bore and flange dimensions confirmed to OEM specification for direct bolt-on fitment
– Uniform tooth spacing machined on CNC equipment for consistent engagement across all chain links

Heavy-Duty Construction
This sprocket zx33 2055869 is manufactured using alloy steel body: induction-hardened tooth surfaces for maximum wear life. Controlled core hardness to absorb drive shock without tooth fracture. Precision bore finish ensures running concentricity and eliminates vibration. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Always replace sprocket and track chains at the same time
– Check idler condition when changing sprocket — the two wear on the same service timeline

Australia-Wide Supply
We supply high-quality sprocket zx33 2055869 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Sprocket ZX33 2055869 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Idler ZX33/30 9269094
– Tread diameter and width matched to OEM for correct chain contact geometry and tension distribution
– Shaft bore and seal housing dimensions matched to OEM for direct frame mounting
– Internal oil-bath lubrication system

Heavy-Duty Construction
This idler zx33/30 9269094 is manufactured using forged or cast steel body with induction-hardened tread surface for wear resistance. Floating seal system: face-type mechanical seal resists ingress in mud, water, and abrasive ground. Precision-bored shaft housing for correct shaft fit without excessive play. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Check idler oil level when carrying out track maintenance
– Inspect tread for grooving and measure tread diameter
– Check idler mounting bracket for cracking when replacing

Australia-Wide Supply
We supply high-quality idler zx33/30 9269094 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Idler ZX33/30 9269094 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Track Roller Zx33/Pc30 YD00008528
– OEM-matched pitch for correct sprocket tooth engagement at rated chain speed
– Pin and bush diameters held to OEM tolerance — correct joint clearance from new
– Shoe bolt hole pattern matched to OEM for direct track shoe attachment

Heavy-Duty Construction
This track roller zx33/pc30 yd00008528 is manufactured using high-carbon alloy steel pin and bush; surface-hardened to resist wear at the pin/bush interface. Track link forged for correct grain structure. Sealed and lubricated pin/bush joints available for extended service intervals in abrasive conditions. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Measure chain pitch before ordering
– Replace complete undercarriage sets where possible
– Set correct track tension after fitting; re-check after first 50hrs of operation

Australia-Wide Supply
We supply high-quality track roller zx33/pc30 yd00008528 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Track Roller Zx33/Pc30 YD00008528 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Side Link ZX33
– OEM pitch tolerance — correct fit in the chain and correct sprocket engagement
– Pin bore surface finish matched to OEM for secure pin press-fit without galling
– Rail hardness matched to OEM for correct roller and idler wear rate

Heavy-Duty Construction
This side link zx33 is manufactured using forged high-carbon alloy steel for fatigue resistance under track load cycling. Induction-hardened rail surface; OEM-spec pin boss geometry. Shoe bolt holes to OEM thread specification. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Press pin in at correct interference fit
– Set chain tension to OEM specification after fitting
– Inspect adjacent links and pins for wear before reinstalling chain

Australia-Wide Supply
We supply high-quality side link zx33 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Side Link ZX33 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Side Link ZX33
– OEM pitch tolerance — correct fit in the chain and correct sprocket engagement
– Pin bore surface finish matched to OEM for secure pin press-fit without galling
– Rail hardness matched to OEM for correct roller and idler wear rate

Heavy-Duty Construction
This side link zx33 is manufactured using forged high-carbon alloy steel for fatigue resistance under track load cycling. Induction-hardened rail surface; OEM-spec pin boss geometry. Shoe bolt holes to OEM thread specification. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Press pin in at correct interference fit
– Set chain tension to OEM specification after fitting
– Inspect adjacent links and pins for wear before reinstalling chain

Australia-Wide Supply
We supply high-quality side link zx33 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Side Link ZX33 appeared first on HEAVY EQUIPMENT PARTS.

**Why This Bush:**
– Correct interference fit: inner bore, outer diameter, and length matched to OEM specification
– Designed for correct load distribution on the pin — prevents point loading and accelerated wear
– Compatible with OEM excavator pin sets — no bore modification required

**Construction:**
– Wear-resistant alloy material: oil-impregnated bronze or heat-treated steel to suit application
– Precision-machined bore surface for smooth pin operation under load
– Corrosion-resistant surface treatment for storage and site conditions

**Installation:**
– Use hydraulic press and correct bush driver — impact fitting distorts the bore geometry
– Inspect pin condition before fitting; replace worn pins at the same service
– Torque retaining fasteners to OEM specification after installation

Fast shipping from NSW.

The post Bucket Bush zx33 40*50*40 appeared first on HEAVY EQUIPMENT PARTS.

**Key Features:**
– OEM-matched inner and outer diameter tolerances for correct press-fit installation
– Flange and overall length dimensions matched to original for correct pin engagement
– Compatible with OEM pins; no bore re-machining required after press fitting

**Material & Treatment:**
– Oil-impregnated sintered bronze or high-strength steel depending on application
– Heat-treated surface for wear resistance at rated operating loads
– Corrosion-protected finish for pre-installation storage in site conditions

**Fitting Notes:**
– Press fit using proper tooling — hammering damages bore geometry
– Apply anti-seize compound on outer diameter before installation in steel housings
– Replace pins when fitting new bushes — worn pins in new bushes cause premature failure

Stocked at Wetherill Park NSW. Australia-wide delivery.

The post Bucket Bush zx33 40*50*35 appeared first on HEAVY EQUIPMENT PARTS.