Why Choose This Track Adjust Cyinder Assy YD60003455 Zx17
– Grease cylinder bore and rod dimensions matched to OEM
– Recoil spring (where applicable) rate confirmed to OEM specification for consistent track release under rock impact
– All mating dimensions to OEM drawing tolerance ±0.1mm for correct fitment in the machine frame adjuster housing

Heavy-Duty Construction
This track adjust cyinder assy yd60003455 zx17 is manufactured using high-strength steel cylinder with machined bore for smooth piston travel. Grease-retained seals rated for contaminated operating conditions. External surfaces treated to resist corrosion in Australian site conditions. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Set track tension to OEM sag specification
– Never use air-powered grease guns for track tension adjustment
– Inspect adjuster for grease leakage at each track inspection

Australia-Wide Supply
We supply high-quality track adjust cyinder assy yd60003455 zx17 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Track Adjust Cyinder Assy YD60003455 Zx17 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Sprocket ZX17 2056268
– Tooth profile machined to OEM geometry
– Pitch diameter and bore confirmed to OEM drawing tolerance ±0.1mm
– Hub and mounting flange dimensions match OEM for direct fitment without modification

Heavy-Duty Construction
This sprocket zx17 2056268 is manufactured using medium-carbon alloy steel: induction-hardened tooth flanks to 50–55 HRC for wear resistance. Core toughness retained below the hardened surface layer to resist impact fracture. Machined surface finish on bore and mounting faces for accurate seating. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Replace sprocket and chain simultaneously
– Inspect carrier rollers and idler at the same time to assess full undercarriage condition
– Torque mounting bolts to OEM specification in a star pattern

Australia-Wide Supply
We supply high-quality sprocket zx17 2056268 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Sprocket ZX17 2056268 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Idler ZX17/15 9312918
– OEM tread diameter and profile — correct chain contact across the full tread width
– OEM shaft and bore dimensions for direct frame bracket fitment without machining
– Sealed oil-bath internal lubrication — no re-greasing required for the service interval

Heavy-Duty Construction
This idler zx17/15 9312918 is manufactured using hardened tread surface (induction-hardened or through-hardened to OEM spec) for wear resistance. Face-type floating seal for reliable contamination exclusion in abrasive undercarriage conditions. Internal shaft supported by precision roller bearings for low friction and long service life. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Check internal oil level at every major service — running dry destroys bearings and seals
– Measure tread diameter and compare to OEM wear limit before reinstalling at a service
– Inspect mounting bracket welds for fatigue cracking after long service in hard ground

Australia-Wide Supply
We supply high-quality idler zx17/15 9312918 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Idler ZX17/15 9312918 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Side Link ZX17 YD00006525+ YD40002586
– OEM pitch tolerance — correct fit in the chain and correct sprocket engagement
– Pin bore surface finish matched to OEM for secure pin press-fit without galling
– Rail hardness matched to OEM for correct roller and idler wear rate

Heavy-Duty Construction
This side link zx17 yd00006525+ yd40002586 is manufactured using forged high-carbon alloy steel for fatigue resistance under track load cycling. Induction-hardened rail surface; OEM-spec pin boss geometry. Shoe bolt holes to OEM thread specification. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Press pin in at correct interference fit
– Set chain tension to OEM specification after fitting
– Inspect adjacent links and pins for wear before reinstalling chain

Australia-Wide Supply
We supply high-quality side link zx17 yd00006525+ yd40002586 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Side Link ZX17 YD00006525+ YD40002586 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Side Link Pair Zx17 YD00006525+ YD40002586
– OEM pitch dimension maintained to tight tolerance
– Pin bore diameter and surface finish matched to OEM for correct press-fit without bore damage
– Rail surface hardened for correct roller and idler contact wear resistance

Heavy-Duty Construction
This side link pair zx17 yd00006525+ yd40002586 is manufactured using forged high-carbon alloy steel: correct fatigue resistance at the pin boss and shoe bolt holes. Induction-hardened rail surface for roller wear resistance. Shoe bolt holes drilled and tapped to OEM pitch and thread specification. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Measure existing chain pitch before ordering replacement links
– Replace link sets in full chains where possible
– Set correct chain tension after fitting; inspect and adjust after first 50hrs of operation

Australia-Wide Supply
We supply high-quality side link pair zx17 yd00006525+ yd40002586 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Side Link Pair Zx17 YD00006525+ YD40002586 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Bucket Pin ZX17 GS2-YD00006664
– OEM-matched pin diameter, length, and retainer groove for direct replacement
– Case-hardened bearing surface (58–62 HRC)
– Compatible with OEM bucket link and tilt cylinder pin bores; no machining required

Heavy-Duty Construction
This bucket pin zx17 gs2-yd00006664 is manufactured using chrome-moly alloy steel, hard chrome plated bearing surface. Ground to h6 tolerance for correct clearance with OEM bushes. Corrosion-resistant chrome surface handles wet and abrasive conditions. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Grease pin immediately after installation and re-grease at every 50hr service in abrasive ground
– Replace bucket pin bushes at the same service to maintain correct joint clearance
– Inspect bucket ears for cracking when changing pins in impact applications

Australia-Wide Supply
We supply high-quality bucket pin zx17 gs2-yd00006664 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Bucket Pin ZX17 GS2-YD00006664 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Bucket pin zx17 30*86(95) LP
– Direct OEM fit: diameter, length, and locking groove matched to original specification
– Surface hardness 58–62 HRC on bearing zone — handles continuous impact and crowd loading
– Hard chrome plating for corrosion resistance and low-friction operation

Heavy-Duty Construction
This bucket pin zx17 30*86(95) lp is manufactured using chrome-moly alloy steel; case-hardened surface, ductile core for combined toughness and wear resistance. Precision ground to h6 diameter tolerance. OEM retainer groove for standard locking hardware. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Always repack the joint with EP grease before and after fitting
– Replace link bushes at the same time; worn bushes on a new pin accelerate wear rapidly
– Check bucket ear dimensions for spread or cracking before fitting

Australia-Wide Supply
We supply high-quality bucket pin zx17 30*86(95) lp replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Bucket pin zx17 30*86(95) LP appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Bucket pin zx17 30*171(181)
– OEM-matched pin diameter, length, and retainer groove for direct replacement
– Case-hardened bearing surface (58–62 HRC)
– Compatible with OEM bucket link and tilt cylinder pin bores; no machining required

Heavy-Duty Construction
This bucket pin zx17 30*171(181) is manufactured using chrome-moly alloy steel, hard chrome plated bearing surface. Ground to h6 tolerance for correct clearance with OEM bushes. Corrosion-resistant chrome surface handles wet and abrasive conditions. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Grease pin immediately after installation and re-grease at every 50hr service in abrasive ground
– Replace bucket pin bushes at the same service to maintain correct joint clearance
– Inspect bucket ears for cracking when changing pins in impact applications

Australia-Wide Supply
We supply high-quality bucket pin zx17 30*171(181) replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Bucket pin zx17 30*171(181) appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Bucket pin zx17 30*212(222)
– Direct OEM fit: diameter, length, and locking groove matched to original specification
– Surface hardness 58–62 HRC on bearing zone — handles continuous impact and crowd loading
– Hard chrome plating for corrosion resistance and low-friction operation

Heavy-Duty Construction
This bucket pin zx17 30*212(222) is manufactured using chrome-moly alloy steel; case-hardened surface, ductile core for combined toughness and wear resistance. Precision ground to h6 diameter tolerance. OEM retainer groove for standard locking hardware. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Always repack the joint with EP grease before and after fitting
– Replace link bushes at the same time; worn bushes on a new pin accelerate wear rapidly
– Check bucket ear dimensions for spread or cracking before fitting

Australia-Wide Supply
We supply high-quality bucket pin zx17 30*212(222) replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Bucket pin zx17 30*212(222) appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This swing pin zx17 45*309(317)
– OEM-matched dimensions for direct fitment
– Quality-checked against OEM reference dimensions before dispatch
– Built for Australian operating conditions

Heavy-Duty Construction
This swing pin zx17 45*309(317) is manufactured using material selection matched to OEM specification for the mechanical and thermal demands of the application. Surface treatment for corrosion protection in site and storage environments. Dimensional accuracy verified at production to OEM tolerance specifications. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Always install with correct tooling and to OEM torque specifications
– Inspect mating components for wear before installation
– Maintain OEM service intervals

Australia-Wide Supply
We supply high-quality swing pin zx17 45*309(317) replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post swing pin zx17 45*309(317) appeared first on HEAVY EQUIPMENT PARTS.