Why Choose This Track adjuster assy SK330-8/SK350-8 / SK330
– Grease cylinder bore, rod, and stroke dimensions match OEM
– Recoil spring force rated to OEM specification (where applicable)
– Complete assembly tested before dispatch — no field calibration required

Heavy-Duty Construction
This track adjuster assy sk330-8/sk350-8 / sk330 is manufactured using steel cylinder and rod: machined bore for precision piston travel without galling. Seal kit: grease-rated seals appropriate for contamination exposure in excavation and earthmoving environments. Corrosion-resistant external treatment for extended service life in wet and abrasive conditions. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Purge old grease before injecting new — don’t add pressure to a seized adjuster
– Re-tension track after replacement and recheck after first 10 operating hours
– Record installation in service log for warranty reference

Australia-Wide Supply
We supply high-quality track adjuster assy sk330-8/sk350-8 / sk330 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Track adjuster assy SK330-8/SK350-8 / SK330 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Bush Sk330-8/Sk350-8 No.2- 90*105*80
– OEM-matched inner and outer diameter tolerances for correct press-fit installation
– Flange and overall length dimensions matched to original for correct pin engagement
– Compatible with OEM pins; no bore re-machining required after press fitting

Material & Treatment:
– Oil-impregnated sintered bronze or high-strength steel depending on application
– Heat-treated surface for wear resistance at rated operating loads
– Corrosion-protected finish for pre-installation storage in site conditions

Fitting Notes:
– Press fit using proper tooling — hammering damages bore geometry
– Apply anti-seize compound on outer diameter before installation in steel housings
– Replace pins when fitting new bushes — worn pins in new bushes cause premature failure

Stocked at Wetherill Park NSW. Australia-wide delivery.
Australia-Wide Supply
We supply high-quality bush sk330-8/sk350-8 no.2- 90*105*80 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Bush SK330-8/SK350-8 No.2- 90*105*80 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Bush Sk330-8/Sk350-8 No.1-90*120*126 Flange
– Correct interference fit: inner bore, outer diameter, and length matched to OEM specification
– Designed for correct load distribution on the pin — prevents point loading and accelerated wear
– Compatible with OEM excavator pin sets — no bore modification required

Heavy-Duty Construction
– Wear-resistant alloy material: oil-impregnated bronze or heat-treated steel to suit application
– Precision-machined bore surface for smooth pin operation under load
– Corrosion-resistant surface treatment for storage and site conditions

Maintenance Recommendations
– Use hydraulic press and correct bush driver — impact fitting distorts the bore geometry
– Inspect pin condition before fitting; replace worn pins at the same service
– Torque retaining fasteners to OEM specification after installation
Australia-Wide Supply
We supply high-quality bush sk330-8/sk350-8 no.1-90*120*126 flange replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Bush SK330-8/SK350-8 No.1-90*120*126 Flange appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Bush Sk330-8/Sk350-8 No.3-80*95*85
– OEM-matched inner and outer diameter tolerances for correct press-fit installation
– Flange and overall length dimensions matched to original for correct pin engagement
– Compatible with OEM pins; no bore re-machining required after press fitting

Material & Treatment:
– Oil-impregnated sintered bronze or high-strength steel depending on application
– Heat-treated surface for wear resistance at rated operating loads
– Corrosion-protected finish for pre-installation storage in site conditions

Fitting Notes:
– Press fit using proper tooling — hammering damages bore geometry
– Apply anti-seize compound on outer diameter before installation in steel housings
– Replace pins when fitting new bushes — worn pins in new bushes cause premature failure

Stocked at Wetherill Park NSW. Australia-wide delivery.
Australia-Wide Supply
We supply high-quality bush sk330-8/sk350-8 no.3-80*95*85 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Bush SK330-8/SK350-8 No.3-80*95*85 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Bush Sk330-8/Sk350-8 No.4-90*105*90
– Correct interference fit: inner bore, outer diameter, and length matched to OEM specification
– Designed for correct load distribution on the pin — prevents point loading and accelerated wear
– Compatible with OEM excavator pin sets — no bore modification required

Heavy-Duty Construction
– Wear-resistant alloy material: oil-impregnated bronze or heat-treated steel to suit application
– Precision-machined bore surface for smooth pin operation under load
– Corrosion-resistant surface treatment for storage and site conditions

Maintenance Recommendations
– Use hydraulic press and correct bush driver — impact fitting distorts the bore geometry
– Inspect pin condition before fitting; replace worn pins at the same service
– Torque retaining fasteners to OEM specification after installation
Australia-Wide Supply
We supply high-quality bush sk330-8/sk350-8 no.4-90*105*90 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Bush SK330-8/SK350-8 No.4-90*105*90 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Turbocharger-Sk350-8 J08E Tm
– OEM-matched dimensions for direct fitment — no modification or machining required
– Built to withstand Australian operating conditions: heat, dust, and extended cycle times
– Fully quality-checked before dispatch

Heavy-Duty Construction
– High-grade materials selected to match OEM mechanical and thermal performance specifications
– Surface treatment for corrosion resistance in harsh site environments
– Dimensional accuracy verified against OEM reference at production

Maintenance Recommendations
– Always fit with the correct tools and to OEM torque specifications
– Inspect mating components for wear before installation
– Retain OEM service intervals — aftermarket parts perform to OEM standards when correctly maintained
Australia-Wide Supply
We supply high-quality turbocharger-sk350-8 j08e tm replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Turbocharger-SK350-8 J08E TM appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Radiator Hose-Lower Lc05P01422P1 / Sk330-8/8E/Sk350-8/8E
– Fin and tube geometry matched to OEM for correct cooling capacity at rated engine output
– Full-face brazed aluminium core — no epoxy joins that crack under thermal cycling
– Direct OEM mounting — no drilling, cutting, or bracket fabrication

Heavy-Duty Construction
– Aluminium tank construction: pressure-rated to 110 kPa operating, tested to 150 kPa
– Electrocoat corrosion protection on steel frame components
– Pressure-tested before dispatch — arrives ready to fit

Maintenance Tips:
– Use OEM-spec coolant at correct dilution — incorrect mix causes internal scale
– Clean fins with low-pressure air every 500hrs; avoid high-pressure water on fins
– Inspect hose connections for weeping at 1,000hr service intervals

Australia-wide delivery from NSW. Backed by a
Australia-Wide Supply
We supply high-quality radiator hose-lower lc05p01422p1 / sk330-8/8e/sk350-8/8e replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Radiator Hose-Lower LC05P01422P1 / SK330-8/8E/SK350-8/8E appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Radiator Hose-Top Lc05P01464P1 / Sk330-8/8E/Sk350-8/8E
– Core tube pitch and fin density matched to OEM specification for correct flow rate
– Brazed aluminium core construction for high thermal transfer efficiency
– Inlet/outlet connections sized to match OEM hose fittings — no adapters needed

Heavy-Duty Construction
– Heavy-gauge aluminium tanks withstand operating pressures up to 110 kPa
– Electrocoated frame provides corrosion resistance in harsh Australian site environments
– Pressure-tested to 150 kPa before dispatch; zero-leak guarantee

Maintenance Recommendations
– Flush coolant system before fitting; mixing incompatible coolants causes internal corrosion
– Check for fin damage and debris blockage every 250hrs in dusty conditions
– Fits OEM mounting points — no bracket modifications required

Fast delivery from Wetherill Park NSW warehouse.
Australia-Wide Supply
We supply high-quality radiator hose-top lc05p01464p1 / sk330-8/8e/sk350-8/8e replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Radiator Hose-Top LC05P01464P1 / SK330-8/8E/SK350-8/8E appeared first on HEAVY EQUIPMENT PARTS.