Why Choose This Pin Lock Bolt+2 nuts M18*2.5*180
– Hardened to OEM specification
– Ground to h6 diameter tolerance — correct clearance with OEM bushes, no shimming required
– Retaining groove and lock hole configuration matched to OEM

Heavy-Duty Construction
This pin lock bolt+2 nuts m18*2.5*180 is manufactured using chrome-moly alloy steel through-hardened then case-hardened for combined toughness and wear resistance. Hard chrome bearing surface: corrosion-resistant and low-friction under continuous grease lubrication. Precision ground finish for consistent fit across all joint positions. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Pack joint with fresh EP grease before and immediately after installation
– Inspect bush bore diameter — replace bushes if bore is beyond OEM tolerance
– Torque retaining hardware to OEM specification; re-check after first 8 hours of operation

Australia-Wide Supply
We supply high-quality pin lock bolt+2 nuts m18*2.5*180 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Pin Lock Bolt+2 nuts M18*2.5*180 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Pin Lock Bolt+2 nuts M18*2.5*110
– OEM-matched diameter and length tolerances for correct joint clearance without shimming
– Case-hardened surface with tough core
– OEM-compatible retaining groove and locking configuration

Heavy-Duty Construction
This pin lock bolt+2 nuts m18*2.5*110 is manufactured using chrome-moly alloy steel: surface hardness 58–62 HRC, core hardness 35–45 HRC. Hard chrome plating on bearing surface. Ground finish to h6 tolerance for interference-free fitting. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Apply EP grease to pin before fitting and pack grease nipple immediately after installation
– Check bush bore condition before fitting — oversized bores accelerate pin wear
– Replace pin seals and dust excluders at the same service to prevent contamination ingress

Australia-Wide Supply
We supply high-quality pin lock bolt+2 nuts m18*2.5*110 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Pin Lock Bolt+2 nuts M18*2.5*110 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Pin Lock Bolt+2 nuts M14*2*145
– Hardened to OEM specification
– Ground to h6 diameter tolerance — correct clearance with OEM bushes, no shimming required
– Retaining groove and lock hole configuration matched to OEM

Heavy-Duty Construction
This pin lock bolt+2 nuts m14*2*145 is manufactured using chrome-moly alloy steel through-hardened then case-hardened for combined toughness and wear resistance. Hard chrome bearing surface: corrosion-resistant and low-friction under continuous grease lubrication. Precision ground finish for consistent fit across all joint positions. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Pack joint with fresh EP grease before and immediately after installation
– Inspect bush bore diameter — replace bushes if bore is beyond OEM tolerance
– Torque retaining hardware to OEM specification; re-check after first 8 hours of operation

Australia-Wide Supply
We supply high-quality pin lock bolt+2 nuts m14*2*145 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Pin Lock Bolt+2 nuts M14*2*145 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Pin Lock Bolt+2 nuts M12*1.75*140
– OEM-matched diameter and length tolerances for correct joint clearance without shimming
– Case-hardened surface with tough core
– OEM-compatible retaining groove and locking configuration

Heavy-Duty Construction
This pin lock bolt+2 nuts m12*1.75*140 is manufactured using chrome-moly alloy steel: surface hardness 58–62 HRC, core hardness 35–45 HRC. Hard chrome plating on bearing surface. Ground finish to h6 tolerance for interference-free fitting. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Apply EP grease to pin before fitting and pack grease nipple immediately after installation
– Check bush bore condition before fitting — oversized bores accelerate pin wear
– Replace pin seals and dust excluders at the same service to prevent contamination ingress

Australia-Wide Supply
We supply high-quality pin lock bolt+2 nuts m12*1.75*140 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Pin Lock Bolt+2 nuts M12*1.75*140 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Pin Lock Bolt+2 nuts M10*1.5*90
– Hardened to OEM specification
– Ground to h6 diameter tolerance — correct clearance with OEM bushes, no shimming required
– Retaining groove and lock hole configuration matched to OEM

Heavy-Duty Construction
This pin lock bolt+2 nuts m10*1.5*90 is manufactured using chrome-moly alloy steel through-hardened then case-hardened for combined toughness and wear resistance. Hard chrome bearing surface: corrosion-resistant and low-friction under continuous grease lubrication. Precision ground finish for consistent fit across all joint positions. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Pack joint with fresh EP grease before and immediately after installation
– Inspect bush bore diameter — replace bushes if bore is beyond OEM tolerance
– Torque retaining hardware to OEM specification; re-check after first 8 hours of operation

Australia-Wide Supply
We supply high-quality pin lock bolt+2 nuts m10*1.5*90 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Pin Lock Bolt+2 nuts M10*1.5*90 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Pin Lock Bolt+2 nuts M24*3*200
– OEM-matched diameter and length tolerances for correct joint clearance without shimming
– Case-hardened surface with tough core
– OEM-compatible retaining groove and locking configuration

Heavy-Duty Construction
This pin lock bolt+2 nuts m24*3*200 is manufactured using chrome-moly alloy steel: surface hardness 58–62 HRC, core hardness 35–45 HRC. Hard chrome plating on bearing surface. Ground finish to h6 tolerance for interference-free fitting. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Apply EP grease to pin before fitting and pack grease nipple immediately after installation
– Check bush bore condition before fitting — oversized bores accelerate pin wear
– Replace pin seals and dust excluders at the same service to prevent contamination ingress

Australia-Wide Supply
We supply high-quality pin lock bolt+2 nuts m24*3*200 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Pin Lock Bolt+2 nuts M24*3*200 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Pin Lock Bolt+2 nuts M20*2.5*170
– Hardened to OEM specification
– Ground to h6 diameter tolerance — correct clearance with OEM bushes, no shimming required
– Retaining groove and lock hole configuration matched to OEM

Heavy-Duty Construction
This pin lock bolt+2 nuts m20*2.5*170 is manufactured using chrome-moly alloy steel through-hardened then case-hardened for combined toughness and wear resistance. Hard chrome bearing surface: corrosion-resistant and low-friction under continuous grease lubrication. Precision ground finish for consistent fit across all joint positions. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Pack joint with fresh EP grease before and immediately after installation
– Inspect bush bore diameter — replace bushes if bore is beyond OEM tolerance
– Torque retaining hardware to OEM specification; re-check after first 8 hours of operation

Australia-Wide Supply
We supply high-quality pin lock bolt+2 nuts m20*2.5*170 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Pin Lock Bolt+2 nuts M20*2.5*170 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Pin Lock Bolt+2 nuts M20*2.5*160 10.9
– OEM-matched diameter and length tolerances for correct joint clearance without shimming
– Case-hardened surface with tough core
– OEM-compatible retaining groove and locking configuration

Heavy-Duty Construction
This pin lock bolt+2 nuts m20*2.5*160 10.9 is manufactured using chrome-moly alloy steel: surface hardness 58–62 HRC, core hardness 35–45 HRC. Hard chrome plating on bearing surface. Ground finish to h6 tolerance for interference-free fitting. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Apply EP grease to pin before fitting and pack grease nipple immediately after installation
– Check bush bore condition before fitting — oversized bores accelerate pin wear
– Replace pin seals and dust excluders at the same service to prevent contamination ingress

Australia-Wide Supply
We supply high-quality pin lock bolt+2 nuts m20*2.5*160 10.9 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Pin Lock Bolt+2 nuts M20*2.5*160 10.9 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Pin Lock Bolt+2 nuts M16*2*120 10.9
– Hardened to OEM specification
– Ground to h6 diameter tolerance — correct clearance with OEM bushes, no shimming required
– Retaining groove and lock hole configuration matched to OEM

Heavy-Duty Construction
This pin lock bolt+2 nuts m16*2*120 10.9 is manufactured using chrome-moly alloy steel through-hardened then case-hardened for combined toughness and wear resistance. Hard chrome bearing surface: corrosion-resistant and low-friction under continuous grease lubrication. Precision ground finish for consistent fit across all joint positions. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Pack joint with fresh EP grease before and immediately after installation
– Inspect bush bore diameter — replace bushes if bore is beyond OEM tolerance
– Torque retaining hardware to OEM specification; re-check after first 8 hours of operation

Australia-Wide Supply
We supply high-quality pin lock bolt+2 nuts m16*2*120 10.9 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Pin Lock Bolt+2 nuts M16*2*120 10.9 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Pin Lock Bolt+2 nuts M10*80 10.9
– OEM-matched diameter and length tolerances for correct joint clearance without shimming
– Case-hardened surface with tough core
– OEM-compatible retaining groove and locking configuration

Heavy-Duty Construction
This pin lock bolt+2 nuts m10*80 10.9 is manufactured using chrome-moly alloy steel: surface hardness 58–62 HRC, core hardness 35–45 HRC. Hard chrome plating on bearing surface. Ground finish to h6 tolerance for interference-free fitting. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Apply EP grease to pin before fitting and pack grease nipple immediately after installation
– Check bush bore condition before fitting — oversized bores accelerate pin wear
– Replace pin seals and dust excluders at the same service to prevent contamination ingress

Australia-Wide Supply
We supply high-quality pin lock bolt+2 nuts m10*80 10.9 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Pin Lock Bolt+2 nuts M10*80 10.9 appeared first on HEAVY EQUIPMENT PARTS.