Why Choose This Pin-Arm Cyl rod mount VI055-1glp VIO55
– Arm pin diameter and length machined to OEM specification for correct bush clearance
– Case-hardened surface (58–62 HRC) with ductile core for combined wear and impact resistance
– OEM retaining groove configuration — fits OEM locking hardware without modification

Heavy-Duty Construction
This pin-arm cyl rod mount vi055-1glp vio55 is manufactured using chrome-moly alloy steel with hard chrome plated bearing surface. Ground finish to h6 tolerance. Corrosion-resistant surface for wet and contaminated operating conditions. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Pack the joint with EP grease before and immediately after fitting
– Replace arm pin bushes at the same service — mixed wear states cause premature failure
– Check stick cylinder pin bores for wear while the arm is disassembled

Australia-Wide Supply
We supply high-quality pin-arm cyl rod mount vi055-1glp vio55 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Pin-Arm Cyl rod mount VI055-1glp VIO55 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Pin-Arm Cyl rod mount VI055-1glp VIO55
– Machined to OEM arm pin diameter and length — correct fit with OEM or OEM-dimension bushes
– Hard chrome bearing surface
– Locking groove machined to OEM position and depth for secure retention

Heavy-Duty Construction
This pin-arm cyl rod mount vi055-1glp vio55 is manufactured using chrome-moly alloy steel; case-hardened to 58–62 HRC surface with tough core. Ground to h6 tolerance for predictable fit across the arm pin bore. Hard chrome plating on bearing surface reduces friction and extends service interval. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Grease joint before installation; re-grease at 50hr intervals in abrasive conditions
– Inspect arm pivot housing bore for ovality before fitting new pin
– Replace seals and dust excluders at the same service

Australia-Wide Supply
We supply high-quality pin-arm cyl rod mount vi055-1glp vio55 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Pin-Arm Cyl rod mount VI055-1glp VIO55 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Pin-Arm Cyl Rod Mt ZX360 110*306
– Arm pin diameter and length machined to OEM specification for correct bush clearance
– Case-hardened surface (58–62 HRC) with ductile core for combined wear and impact resistance
– OEM retaining groove configuration — fits OEM locking hardware without modification

Heavy-Duty Construction
This pin-arm cyl rod mt zx360 110*306 is manufactured using chrome-moly alloy steel with hard chrome plated bearing surface. Ground finish to h6 tolerance. Corrosion-resistant surface for wet and contaminated operating conditions. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Pack the joint with EP grease before and immediately after fitting
– Replace arm pin bushes at the same service — mixed wear states cause premature failure
– Check stick cylinder pin bores for wear while the arm is disassembled

Australia-Wide Supply
We supply high-quality pin-arm cyl rod mt zx360 110*306 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Pin-Arm Cyl Rod Mt ZX360 110*306 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Pin-Arm Cyl Rod mt PC300 100*270
– Machined to OEM arm pin diameter and length — correct fit with OEM or OEM-dimension bushes
– Hard chrome bearing surface
– Locking groove machined to OEM position and depth for secure retention

Heavy-Duty Construction
This pin-arm cyl rod mt pc300 100*270 is manufactured using chrome-moly alloy steel; case-hardened to 58–62 HRC surface with tough core. Ground to h6 tolerance for predictable fit across the arm pin bore. Hard chrome plating on bearing surface reduces friction and extends service interval. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Grease joint before installation; re-grease at 50hr intervals in abrasive conditions
– Inspect arm pivot housing bore for ovality before fitting new pin
– Replace seals and dust excluders at the same service

Australia-Wide Supply
We supply high-quality pin-arm cyl rod mt pc300 100*270 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Pin-Arm Cyl Rod mt PC300 100*270 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Pin-Arm Cyl rod mt 312 60*190
– Arm pin diameter and length machined to OEM specification for correct bush clearance
– Case-hardened surface (58–62 HRC) with ductile core for combined wear and impact resistance
– OEM retaining groove configuration — fits OEM locking hardware without modification

Heavy-Duty Construction
This pin-arm cyl rod mt 312 60*190 is manufactured using chrome-moly alloy steel with hard chrome plated bearing surface. Ground finish to h6 tolerance. Corrosion-resistant surface for wet and contaminated operating conditions. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Pack the joint with EP grease before and immediately after fitting
– Replace arm pin bushes at the same service — mixed wear states cause premature failure
– Check stick cylinder pin bores for wear while the arm is disassembled

Australia-Wide Supply
We supply high-quality pin-arm cyl rod mt 312 60*190 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Pin-Arm Cyl rod mt 312 60*190 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Pin-Arm Cyl rod mt 320D 80*235
– Arm pin diameter and length machined to OEM specification for correct bush clearance
– Case-hardened surface (58–62 HRC) with ductile core for combined wear and impact resistance
– OEM retaining groove configuration — fits OEM locking hardware without modification

Heavy-Duty Construction
This pin-arm cyl rod mt 320d 80*235 is manufactured using chrome-moly alloy steel with hard chrome plated bearing surface. Ground finish to h6 tolerance. Corrosion-resistant surface for wet and contaminated operating conditions. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Pack the joint with EP grease before and immediately after fitting
– Replace arm pin bushes at the same service — mixed wear states cause premature failure
– Check stick cylinder pin bores for wear while the arm is disassembled

Australia-Wide Supply
We supply high-quality pin-arm cyl rod mt 320d 80*235 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Pin-Arm Cyl rod mt 320D 80*235 appeared first on HEAVY EQUIPMENT PARTS.