Why Choose This Track group set PC60-7 38L
– Pitch: matches OEM chain pitch for this machine — confirmed to engineering drawing
– Rail surface: OEM height and width for correct carrier and track roller contact geometry
– Bore: OEM dimension for correct pin press-fit

Heavy-Duty Construction
This track group set pc60-7 38l is manufactured using alloy steel, carburised and case-hardened rail surface. Core toughness prevents brittle fracture under impact loads. Dimensional inspection before packaging. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Use new pins and bushes — never reuse worn bores for a new link
– Verify assembly pitch uniformity around the replaced section after fitting
– If more than 3 consecutive links are cracked, assess for full chain replacement

Australia-Wide Supply
We supply high-quality track group set pc60-7 38l replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Track group set PC60-7 38L appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Track Link Assy 38L PC88 PC60-7
– OEM chain pitch: matched to sprocket tooth spacing — prevents tooth-climbing wear
– Link height to OEM spec: correct contact geometry with carrier and track rollers
– Pin/bush dimensions to OEM: correct interface clearance for sealed-lube life

Heavy-Duty Construction
This track link assy 38l pc88 pc60-7 is manufactured using alloy steel link body with case-hardened rail surface: resists roller contact wear. Hardened pins and bushes to OEM specification: wear rate matched to the link body. Assembly inspected for pitch accuracy and master link engagement before dispatch. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Always replace sprocket and chain assembly together
– Inspect rollers at the same time: roller flat spots damage new chain rails
– Set OEM sag immediately after installation and recheck at 10-hour break-in

Australia-Wide Supply
We supply high-quality track link assy 38l pc88 pc60-7 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Track Link Assy 38L PC88 PC60-7 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Loose Link 201-32-51122/32 / PC60-7
– OEM pitch tolerance — correct fit in the chain and correct sprocket engagement
– Pin bore surface finish matched to OEM for secure pin press-fit without galling
– Rail hardness matched to OEM for correct roller and idler wear rate

Heavy-Duty Construction
This loose link 201-32-51122/32 / pc60-7 is manufactured using forged high-carbon alloy steel for fatigue resistance under track load cycling. Induction-hardened rail surface; OEM-spec pin boss geometry. Shoe bolt holes to OEM thread specification. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Press pin in at correct interference fit
– Set chain tension to OEM specification after fitting
– Inspect adjacent links and pins for wear before reinstalling chain

Australia-Wide Supply
We supply high-quality loose link 201-32-51122/32 / pc60-7 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Loose Link 201-32-51122/32 / PC60-7 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Idler Assy PC60-7 21W-30-00014
– Tread diameter and width matched to OEM for correct chain contact geometry and tension distribution
– Shaft bore and seal housing dimensions matched to OEM for direct frame mounting
– Internal oil-bath lubrication system

Heavy-Duty Construction
This idler assy pc60-7 21w-30-00014 is manufactured using forged or cast steel body with induction-hardened tread surface for wear resistance. Floating seal system: face-type mechanical seal resists ingress in mud, water, and abrasive ground. Precision-bored shaft housing for correct shaft fit without excessive play. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Check idler oil level when carrying out track maintenance
– Inspect tread for grooving and measure tread diameter
– Check idler mounting bracket for cracking when replacing

Australia-Wide Supply
We supply high-quality idler assy pc60-7 21w-30-00014 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Idler Assy PC60-7 21W-30-00014 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Dust Seal Track Bush PC60-7
– Lip geometry matched to OEM wiper seal specification for correct rod contact pressure
– Rod diameter and housing bore matched to OEM cylinder specification
– Single or double lip configuration as required (confirm when ordering)

Heavy-Duty Construction
This dust seal track bush pc60-7 is manufactured using polyurethane or NBR lip compound for abrasion resistance and flexibility at operating temperatures. Spring-loaded lip maintains contact pressure as the seal wears. Compatible with standard excavator hydraulic fluid types. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Replace the dust seal whenever the rod seal is replaced
– Inspect the rod surface for pitting or score marks
– Press-fit the dust seal using correct tooling to avoid lip distortion

Australia-Wide Supply
We supply high-quality dust seal track bush pc60-7 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Dust Seal Track Bush PC60-7 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Track Pin 201-32-71150 / Pc60-7
– OEM-matched dimensions for direct fitment — no modification or machining required
– Built to withstand Australian operating conditions: heat, dust, and extended cycle times
– Fully quality-checked before dispatch

Heavy-Duty Construction
– High-grade materials selected to match OEM mechanical and thermal performance specifications
– Surface treatment for corrosion resistance in harsh site environments
– Dimensional accuracy verified against OEM reference at production

Maintenance Recommendations
– Always fit with the correct tools and to OEM torque specifications
– Inspect mating components for wear before installation
– Retain OEM service intervals — aftermarket parts perform to OEM standards when correctly maintained
Australia-Wide Supply
We supply high-quality track pin 201-32-71150 / pc60-7 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Track Pin 201-32-71150 / PC60-7 appeared first on HEAVY EQUIPMENT PARTS.

**Why This Bush:**
– Correct interference fit: inner bore, outer diameter, and length matched to OEM specification
– Designed for correct load distribution on the pin — prevents point loading and accelerated wear
– Compatible with OEM excavator pin sets — no bore modification required

**Construction:**
– Wear-resistant alloy material: oil-impregnated bronze or heat-treated steel to suit application
– Precision-machined bore surface for smooth pin operation under load
– Corrosion-resistant surface treatment for storage and site conditions

**Installation:**
– Use hydraulic press and correct bush driver — impact fitting distorts the bore geometry
– Inspect pin condition before fitting; replace worn pins at the same service
– Torque retaining fasteners to OEM specification after installation

Fast shipping from NSW.

The post Track Bush PC60-7 201-32-71150 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Turbocharger- Pc60-7/8 4D95 6275-81-8200
– OEM-matched dimensions for direct fitment — no modification or machining required
– Built to withstand Australian operating conditions: heat, dust, and extended cycle times
– Fully quality-checked before dispatch

Heavy-Duty Construction
– High-grade materials selected to match OEM mechanical and thermal performance specifications
– Surface treatment for corrosion resistance in harsh site environments
– Dimensional accuracy verified against OEM reference at production

Maintenance Recommendations
– Always fit with the correct tools and to OEM torque specifications
– Inspect mating components for wear before installation
– Retain OEM service intervals — aftermarket parts perform to OEM standards when correctly maintained
Australia-Wide Supply
We supply high-quality turbocharger- pc60-7/8 4d95 6275-81-8200 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Turbocharger- PC60-7/8 4D95 6275-81-8200 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Radiator Hose-Lower 201-03-71182 / Pc60-7 4D95
– Core tube pitch and fin density matched to OEM specification for correct flow rate
– Brazed aluminium core construction for high thermal transfer efficiency
– Inlet/outlet connections sized to match OEM hose fittings — no adapters needed

Heavy-Duty Construction
– Heavy-gauge aluminium tanks withstand operating pressures up to 110 kPa
– Electrocoated frame provides corrosion resistance in harsh Australian site environments
– Pressure-tested to 150 kPa before dispatch; zero-leak guarantee

Maintenance Recommendations
– Flush coolant system before fitting; mixing incompatible coolants causes internal corrosion
– Check for fin damage and debris blockage every 250hrs in dusty conditions
– Fits OEM mounting points — no bracket modifications required

Fast delivery from Wetherill Park NSW warehouse.
Australia-Wide Supply
We supply high-quality radiator hose-lower 201-03-71182 / pc60-7 4d95 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Radiator Hose-Lower 201-03-71182 / PC60-7 4D95 appeared first on HEAVY EQUIPMENT PARTS.

Why Choose This Radiator Hose-Top 201-03-71171 / Pc60-7 4D95
– Fin and tube geometry matched to OEM for correct cooling capacity at rated engine output
– Full-face brazed aluminium core — no epoxy joins that crack under thermal cycling
– Direct OEM mounting — no drilling, cutting, or bracket fabrication

Heavy-Duty Construction
– Aluminium tank construction: pressure-rated to 110 kPa operating, tested to 150 kPa
– Electrocoat corrosion protection on steel frame components
– Pressure-tested before dispatch — arrives ready to fit

Maintenance Tips:
– Use OEM-spec coolant at correct dilution — incorrect mix causes internal scale
– Clean fins with low-pressure air every 500hrs; avoid high-pressure water on fins
– Inspect hose connections for weeping at 1,000hr service intervals

Australia-wide delivery from NSW. Backed by a
Australia-Wide Supply
We supply high-quality radiator hose-top 201-03-71171 / pc60-7 4d95 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Radiator Hose-Top 201-03-71171 / PC60-7 4D95 appeared first on HEAVY EQUIPMENT PARTS.