Compatible Machines
– Compatible with the machine model(s) listed in the product title above
– Please verify your OEM part number against the original unit before ordering to confirm fitment

Why Choose This Seal kit-swing boom Cyl
– OEM-matched pin diameter, length, and retainer groove for direct replacement
– Surface hardness 58–62 HRC on the bearing zone
– Tough alloy steel core handles shock and bending without cracking

Heavy-Duty Construction
This seal kit-swing boom cyl is manufactured using chrome-moly alloy steel, case-hardened and hard chrome plated on bearing surface. Ground finish to h6 diameter tolerance: correct fit with OEM bushes. Corrosion-resistant chrome surface. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Always fit with fresh EP grease and re-grease within the first operating shift
– Inspect and replace boom foot bushes at the same service interval
– Apply OEM retaining torque to locking hardware

Australia-Wide Supply
We supply high-quality seal kit-swing boom cyl replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Seal kit-swing boom Cyl appeared first on HEAVY EQUIPMENT PARTS.

Compatible Machines
– Compatible with the machine model(s) listed in the product title above
– Please verify your OEM part number against the original unit before ordering to confirm fitment

Why Choose This Seal kit-Boom Cyl
– Diameter and length matched to OEM for correct joint clearance at the boom foot housing
– Case-hardened bearing surface (58–62 HRC) with tough ductile core
– OEM-matched locking groove and retainer configuration

Heavy-Duty Construction
This seal kit-boom cyl is manufactured using chrome-moly alloy steel: correct balance of surface hardness and core toughness for high-load boom joints. Hard chrome bearing surface for corrosion resistance in mud and abrasive site conditions. Ground to h6 tolerance for correct OEM bush clearance. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Grease the joint immediately after fitting; re-grease every 50hrs in abrasive conditions
– Check boom foot housing bore for wear
– Replace dust seals at the same service; contamination destroys the chrome surface within hours

Australia-Wide Supply
We supply high-quality seal kit-boom cyl replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Seal kit-Boom Cyl appeared first on HEAVY EQUIPMENT PARTS.

Compatible Machines
– Compatible with the machine model(s) listed in the product title above
– Please verify your OEM part number against the original unit before ordering to confirm fitment

Why Choose This Seal kit-Arm Cyl
– Complete kit: rod seal, piston seal, wiper, O-rings, and backup rings
– OEM-matched seal dimensions for correct groove fit and operating pressure rating
– Polyurethane primary seals for extended service life in continuous-duty excavator applications

Heavy-Duty Construction
This seal kit-arm cyl is manufactured using polyurethane: rod and piston seals. NBR O-rings: compatible with standard mineral hydraulic oils. PTFE backup rings: prevents extrusion at operating pressures up to 350 bar. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Thoroughly inspect and polish the rod surface before fitting
– Use a seal installation tool — improvised tools fold lips and cause immediate bypass
– Test cylinder for bypass at full extension before returning to service

Australia-Wide Supply
We supply high-quality seal kit-arm cyl replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Seal kit-Arm Cyl appeared first on HEAVY EQUIPMENT PARTS.

Compatible Machines
– 305C

Why Choose This Seal kit-Bucket Cyl 305C
– OEM-matched capacity, width, and attachment pin configuration for direct fitment
– Side plates and base plate constructed from abrasion-resistant wear steel
– Tooth adapter positions and side cutter bolt holes matched to OEM spacing

Heavy-Duty Construction
This seal kit-bucket cyl 305c is manufactured using high-strength structural steel reinforced at stress concentration points: heel, side plate joints, and hinge ears. Wear plate lining on base and side walls in high-abrasion applications. Weld seams fully penetrated and ground smooth. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Check all attachment pins and bushes before fitting new bucket
– Fit a full set of new teeth and side cutters when fitting a new bucket
– Inspect coupler or direct-fit pin bores for wear before installation

Australia-Wide Supply
We supply high-quality seal kit-bucket cyl 305c replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Seal kit-Bucket Cyl 305C appeared first on HEAVY EQUIPMENT PARTS.

Compatible Machines
– E305C

Why Choose This Seal kit-Arm Cylinder E305C
– Complete kit: rod seal, piston seal, wiper, O-rings, and backup rings
– OEM-matched seal dimensions for correct groove fit and operating pressure rating
– Polyurethane primary seals for extended service life in continuous-duty excavator applications

Heavy-Duty Construction
This seal kit-arm cylinder e305c is manufactured using polyurethane: rod and piston seals. NBR O-rings: compatible with standard mineral hydraulic oils. PTFE backup rings: prevents extrusion at operating pressures up to 350 bar. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Thoroughly inspect and polish the rod surface before fitting
– Use a seal installation tool — improvised tools fold lips and cause immediate bypass
– Test cylinder for bypass at full extension before returning to service

Australia-Wide Supply
We supply high-quality seal kit-arm cylinder e305c replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Seal kit-Arm Cylinder E305C appeared first on HEAVY EQUIPMENT PARTS.

Compatible Machines
– 161-7145

Why Choose This Seal ***** 161-7145
– OEM-matched cross-section, inner diameter, and outer diameter for correct groove fit
– Rated to operating pressure and temperature range of the original application
– Compatible with standard mineral hydraulic fluid types (specify application for FKM/Viton where required)

Heavy-Duty Construction
This seal ***** 161-7145 is manufactured using nBR or polyurethane construction for the primary application; FKM available for high-temperature circuits. Hardness matched to application groove tolerance. PTFE backup rings included where operating pressure requires anti-extrusion support. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Lubricate with clean hydraulic fluid before fitting — never use petroleum-based grease
– Inspect groove dimensions for wear
– Do not roll or fold seals during installation — use a cone or sleeve installation tool

Australia-Wide Supply
We supply high-quality seal ***** 161-7145 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Seal ***** 161-7145 appeared first on HEAVY EQUIPMENT PARTS.

Compatible Machines
– Compatible with the machine model(s) listed in the product title above
– Please verify your OEM part number against the original unit before ordering to confirm fitment

Why Choose This Seal Kit-Track Adjust
– Complete kit: rod seal, piston seal, wiper, O-rings, and backup rings
– OEM-matched seal dimensions for correct groove fit and operating pressure rating
– Polyurethane primary seals for extended service life in continuous-duty excavator applications

Heavy-Duty Construction
This seal kit-track adjust is manufactured using polyurethane: rod and piston seals. NBR O-rings: compatible with standard mineral hydraulic oils. PTFE backup rings: prevents extrusion at operating pressures up to 350 bar. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Thoroughly inspect and polish the rod surface before fitting
– Use a seal installation tool — improvised tools fold lips and cause immediate bypass
– Test cylinder for bypass at full extension before returning to service

Australia-Wide Supply
We supply high-quality seal kit-track adjust replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Seal Kit-Track Adjust appeared first on HEAVY EQUIPMENT PARTS.

Compatible Machines
– Compatible with the machine model(s) listed in the product title above
– Please verify your OEM part number against the original unit before ordering to confirm fitment

Why Choose This Seal Kit -Control Valve
– Complete kit: rod seal, piston seal, wiper, O-rings, and backup rings
– OEM-matched seal dimensions for correct groove fit and operating pressure rating
– Polyurethane primary seals for extended service life in continuous-duty excavator applications

Heavy-Duty Construction
This seal kit -control valve is manufactured using polyurethane: rod and piston seals. NBR O-rings: compatible with standard mineral hydraulic oils. PTFE backup rings: prevents extrusion at operating pressures up to 350 bar. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Thoroughly inspect and polish the rod surface before fitting
– Use a seal installation tool — improvised tools fold lips and cause immediate bypass
– Test cylinder for bypass at full extension before returning to service

Australia-Wide Supply
We supply high-quality seal kit -control valve replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Seal Kit -Control Valve appeared first on HEAVY EQUIPMENT PARTS.

Compatible Machines
– Compatible with the machine model(s) listed in the product title above
– Please verify your OEM part number against the original unit before ordering to confirm fitment

Why Choose This Seal kit-PPC Valve
– Rod seal, piston seal, wiper seal, O-rings, and backup rings
– All components matched to OEM cylinder bore, rod diameter, and groove dimensions
– Compatible with standard excavator hydraulic fluid types and operating temperatures

Heavy-Duty Construction
This seal kit-ppc valve is manufactured using polyurethane rod and piston seals for high wear resistance and low friction. NBR O-rings for standard hydraulic fluid compatibility; FKM (Viton) available for high-temperature applications. PTFE backup rings for anti-extrusion support at high operating pressures. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Inspect cylinder bore and rod for scoring before fitting new seals
– Clean all grooves with solvent and allow to dry before fitting
– Lubricate all seals with clean hydraulic fluid immediately before installation; never use grease

Australia-Wide Supply
We supply high-quality seal kit-ppc valve replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Seal kit-PPC Valve appeared first on HEAVY EQUIPMENT PARTS.

Compatible Machines
– Compatible with the machine model(s) listed in the product title above
– Please verify your OEM part number against the original unit before ordering to confirm fitment

Why Choose This Seal kit-Travel Motor
– Complete kit: rod seal, piston seal, wiper, O-rings, and backup rings
– OEM-matched seal dimensions for correct groove fit and operating pressure rating
– Polyurethane primary seals for extended service life in continuous-duty excavator applications

Heavy-Duty Construction
This seal kit-travel motor is manufactured using polyurethane: rod and piston seals. NBR O-rings: compatible with standard mineral hydraulic oils. PTFE backup rings: prevents extrusion at operating pressures up to 350 bar. Designed to withstand vibration, impact loads, and harsh operating environments commonly found in construction, quarry, mining, and earthmoving applications. Precision manufacturing helps ensure correct fitment and long service life.

Applications
Suitable for a wide range of heavy equipment and undercarriage systems including:
– Excavators
– Dozers
– Loaders
– Track roller assemblies
– Earthmoving machinery undercarriage components

Maintenance Recommendations
– Thoroughly inspect and polish the rod surface before fitting
– Use a seal installation tool — improvised tools fold lips and cause immediate bypass
– Test cylinder for bypass at full extension before returning to service

Australia-Wide Supply
We supply high-quality seal kit-travel motor replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.

The post Seal kit-Travel Motor appeared first on HEAVY EQUIPMENT PARTS.