Track shoes that match OEM dimensions keep your machine running at rated ground pressure and protect every undercarriage component above them. This earthmoving machine replacement part — the track pad clip on 500mm pc130/e312/sk135/zx135 — replicates OEM shoe width, grouser height, and hole pattern for the PC130/E312/SK135/ZX135 without modifications.

**Performance Specifications:**
* Grouser height: OEM dimension ±1mm for accurate sprocket pitch engagement
* Bolt-hole pattern: CNC-drilled to OEM link-face geometry on calibrated fixtures
* Shoe profile: triple-grouser for all-terrain traction performance

**Material Science:**
* High-manganese steel (Mn 12–14%): strain-hardens from ~200 HB on delivery to 450+ HB under compressive work-hardening in service — significantly outlasting mild-steel alternatives
* Normalised and quenched post-casting for uniform hardness throughout the cross-section
* Shot-peened exterior compresses the surface layer to resist fatigue crack initiation under repeated bending

**Installation & Service:**
* Rotate shoe positions at mid-service life — moves the highest-loaded grouser faces to the lower-wear position
* Torque track bolts per OEM table; recheck at 50-hour intervals after fitting new shoes
* Inspect for cracked grousers at every 500-hour service; cracked shoes compromise sprocket engagement

Fast Australia-wide delivery from Wetherill Park NSW. Order your track pad clip on 500mm pc130/e312/sk135/zx135 today.