Worn bushes accelerate pin wear and increase slop in the excavator undercarriage — left unchecked, the damage extends to costly structural components. This bush 308 cr gx8 . gs4-218-5197 is manufactured to OEM dimensional specifications for correct interference fit and service life.

Compatible Machines
– GS4-218-5197
– 308
– GX8

Why Choose This Bush 308 Cr Gx8 . Gs4-218-5197
– OEM-matched inner and outer diameter tolerances for correct press-fit installation
– Flange and overall length dimensions matched to original for correct pin engagement
– Compatible with OEM pins; no bore re-machining required after press fitting

Material & Treatment:
– Oil-impregnated sintered bronze or high-strength steel depending on application
– Heat-treated surface for wear resistance at rated operating loads
– Corrosion-protected finish for pre-installation storage in site conditions

Fitting Notes:
– Press fit using proper tooling — hammering damages bore geometry
– Apply anti-seize compound on outer diameter before installation in steel housings
– Replace pins when fitting new bushes — worn pins in new bushes cause premature failure

Stocked at Wetherill Park NSW. Australia-wide delivery.
Australia-Wide Supply
We supply high-quality bush 308 cr gx8 . gs4-218-5197 replacement parts across Australia with shipping from NSW. Suitable for aftermarket heavy equipment repairs and undercarriage maintenance applications.