Bucket tooth wear doesn’t slow gradually — once the cutting geometry degrades, digging efficiency drops sharply and adapter damage accelerates. This rc tooth 1u3302rc is manufactured to OEM tooth profile specifications for correct penetration performance and adapter fit.
**Key Features:**
– Tooth profile engineered for balanced penetration across rock, clay, and mixed ground
– OEM-compatible adapter nose fit — twist-lock or snap-pin retainer to match your machine configuration
– Available in chisel, tiger, or flat point profile to suit site conditions
**Material & Hardness:**
– High-alloy wear steel at 450 Brinell hardness; tensile strength ≥1,350 MPa
– Through-hardened to 20mm depth — cutting edge performance is maintained as the tooth wears
– Shot-blasted finish for visual wear inspection and uniform paint adhesion
**Operating Guidance:**
– Replace the full tooth set simultaneously — mixed wear causes uneven bucket loading
– Inspect adapter nose geometry when fitting new teeth — worn adapters accelerate rocking and loss
– Do not weld cracked or worn teeth; welding below rated wear depth reduces impact resistance
Fast Australia-wide delivery from Wetherill Park NSW. 1-year warranty.
